Effect of magnesium addition on microstructure and mechanical properties in wheel steel

XU Zhou,WANG De- yong,CHEN Kai- lai,QU Tian- peng,TIAN Jun

Journal of Iron and Steel Research ›› 2018, Vol. 30 ›› Issue (8) : 633-641.

Journal of Iron and Steel Research ›› 2018, Vol. 30 ›› Issue (8) : 633-641. DOI: 10. 13228/j.boyuan.issn1001- 0963. 20170376

Effect of magnesium addition on microstructure and mechanical properties in wheel steel

  • XU Zhou,WANG De- yong,CHEN Kai- lai,QU Tian- peng,TIAN Jun
Author information +
History +

Abstract

In order to reveal the effect of Mg in low carbon microalloy steel, low carbon microalloy steel of HR60 wheel steel was smelted in vacuum induction furnace and industrial field respectively. The characteristics of typical non- metallic inclusions and microstructure of experimental steels were both compared by OM, SEM- EDS and INCA Feature with automatically scanning inclusions function. The mechanical properties of the experimental steels were also measured. The results show that alumina inclusions are modified to spinel inclusions with small size after Mg addition. Furthermore, acicular ferrite can be induced effectively by inclusions containing magnesium. The microstructures of experimental steels are changed from ‘polygonal ferrite(PF) + pearlite(P)’to ‘polygonal ferrite(PF) + degenerate pearlite(DP) + acicular ferrite(AF)’ and refined by Mg treatment. The strength of experimental steels is improved with Mg addition. In industrial experiments, the fatigue limit of Mg- treated steels is greater than 460MPa, while the fatigue limit of Ca- treated steels is about 450MPa. In addition, the fatigue life of Mg- treated steels is generally higher than that of Ca- treated steels under the condition that the stress is greater than the fatigue limit. In laboratory experiments, the contents of Nb and Ti are reduced while Mg content in steel is 18×10-6, the strength of the wheel steel is close to the reference steel. Therefore, the project to reducing production cost by taking advantage of the microalloy role of Mg is feasible.

Key words

Key words: Mg addition / wheel steel / inclusions / microstructure / mechanical properties

Cite this article

Download Citations
XU Zhou,WANG De- yong,CHEN Kai- lai,QU Tian- peng,TIAN Jun. Effect of magnesium addition on microstructure and mechanical properties in wheel steel[J]. Journal of Iron and Steel Research, 2018, 30(8): 633-641 https://doi.org/10. 13228/j.boyuan.issn1001- 0963. 20170376

References

[1] 孔猛, 李瑞瑾, 王艳丽, 等. 乘用车钢制车轮发展方向[J]. 汽车零部件, 2009(3): 68.
[2] Krewerth D, Lippmann T, Weidner A, et al. Influence of Non-Metallic Inclusions on Fatigue Life in the Very High Cycle Fatigue Regime[J]. International Journal of Fatigue, 2015, 84: 40.
[3] Zhu M L, Xuan F Z. Fatigue Crack Initiation Potential From Defects in Terms of Local Stress Analysis[J]. Chinese Journal of Mechanical Engineering, 2014, 27(3): 496.
[4] Sarma D S, Karasev A V, Jonsson P G. On the Role of Non-Metallic Inclusions in the Nucleation of Acicular Ferrite in Steels[J]. ISIJ Int, 2009, 49(7): 1063.
[5] Yang J, Yamasaki T, Kuwabara M. Behavior of Inclusions in Deoxidation Process of Molten Steel With In-Situ Produced Mg Vapor[J]. ISIJ Int, 2007, 47(5): 699.
[6] Takata R,Yang J,Kuwabara M. Characteristics of Inclusions Generated During Al-Mg Complex Deoxidation of Molten Steel[J]. ISIJ Int, 2007, 47(10): 1379.
[7] Min Y, Li X B, Yu Z, et al. Characterization of the Acicular Ferrite in Al-Deoxidized Low-Carbon Steel Combined With Zr and Mg Additions[J]. Steel Research International, 2016, 87(11): 1503.
[8] 李小兵, 闵义, 刘承军, 等. M(M=Mg,Zr,Mg-Zr)添加对FH40船板钢组织与力学性能影响[J]. 中南大学学报(自然科学版), 2015, 46(10): 3586.
[9] Kojima A, Kiyose A, Uemori R, et al. Super High HAZ Toughness Technology With Fine Microstructure Imparted by Fine Particles[J]. Nippon Steel Technical Research, 2004(90): 2.
[10] Kimura K, Fukumoto S, Shigesato G I, et al. Effect of Mg Addition on Equiaxed Grain Formation in Ferritic Stainless Steel[J]. ISIJ Int, 2013, 53(12): 2167.
[11] Yang W, Zhang L F, Wang X H, et al. Characteristics of Inclusions in Low Carbon Al-Killed Steel During Ladle Furnace Refining and Calcium Treatment[J]. ISIJ Int, 2013, 53(8): 1401.
[12] Kimura S, Nakajima K, Mizoguchi S. Behavior of Alumina-Magnesia Complex Inclusions and Magnesia Inclusions on the Surface of Molten Low-Carbon Steels[J]. Metallurgical & Materials Transactions B, 2001, 32(1): 79.
[13] Suito H, Ohta H. Characteristics of Particle Size Distribution in Early Stage of Deoxidation[J]. ISIJ Int, 2006, 46(1): 33.
[14] 李小兵, 闵义, 王博, 等. Mg和Zr对FH40级船板钢连续冷却转变曲线的影响[J]. 重庆大学学报, 2015, 38(2): 105.
[15] 李文卿. 控冷低碳钢珠光体形貌与退化机制[J]. 钢铁, 1991, 26(10): 30.
[16] 王中学, 王博, 杜益, 等. Ti含量对X65管线钢组织与力学性能的影响[J]. 武汉科技大学学报, 2014, 37(5): 326.
[17] 方琪, 孙伟, 赵德文, 等. 分段冷却工艺对低碳钢中板力学性能的影响[J]. 钢铁, 2009, 44(11): 87.
[18] Gao X Z, Yang S F, Li J S, et al. Effects of MgO Nanoparticle Additions on the Structure and Mechanical Properties of Continuously Cast Steel Billets[J]. Metallurgical & Materials Transactions A, 2016, 47(1): 461.
[19] Wen B, Song B, Pan N, et al. Effect of SiMg Alloy on Inclusions and Microstructures of 16Mn Steel[J]. Ironmaking & Steelmaking, 2011, 38(8): 577.
[20] Gregg J M, Bhadeshia H K D H. Solid-State Nucleation of Acicular Ferrite on Minerals Added to Molten Steel[J]. Acta Materialia, 1997, 45(2): 739.
[21] Sun Q, Di H S, Li J C, et al. A Comparative Study of the Microstructure and Properties of 800 Mpa Microalloyed C-Mn Steel Welded Joints by Laser and Gas Metal Arc Welding[J]. Materials Science & Engineering A, 2016, 669: 150.
[22] Choi I C, Kim Y J, Wang Y M, et al. Nanoindentation Behavior of Nanotwinned Cu: Influence of Indenter Angle on Hardness, Strain Rate Sensitivity and Activation Volume[J]. Acta Materialia, 2013, 61(19): 7313.
[23] 习小军, 赖朝彬, 李京社, 等. 钇基稀土对E36钢板显微组织及冲击性能的影响[J]. 工程科学学报, 2017, 39(2): 244.

92

Accesses

0

Citation

Detail

Sections
Recommended

/